Banda Elite 2000.4 2000 Wrms 1 Ohm 4 Canais Novo Envio rapido FEDEX

Description

Elite Band Module 2000.4 2000 Wrms 1 Ohm 4 Channels

With a powerful 2000 Watts RMS in 4 channels and impedance of 1 or 2 Ohms per channel, the amplifiers of the new ELITE line are very versatile, allowing different types of installations with a single amplifier. Thanks to its FULL-RANGE range of frequency response, the ELITE fits into any project with: Subwoofers, Woofers, Mid-Bass, Horns or Super Tweeters, being also possible to connect in 4, 3 or 2 channels, when used in recognized bridge.

With the ELITE 2000.4 it is possible to connect a midrange sound system completely, enjoying the audio quality already established by BANDA AUDIOPARTS in addition to low consumption.

Technical specifications

- Maximum Power 14.4v at 1 Ohms: 4 x 600 WRMS
- Maximum Power 14.4v at 2 Ohms: 4 x 400 WRMS
- Maximum Power Bridge 14.4v at 2 Ohms: 2 x 1250 WRMS
- Maximum Power 12.6v at 1 Ohms: 4 x 500 WRMS
- Maximum Power 12.6v at 2 Ohms: 4 x 300 WRMS
- Maximum Power 12.6v Bridge @ 2 Ohms: 2 x 1000 WRMS
- Efficiency @ 2 Ohms: 86%
- Efficiency @ 1 Ohms: 80%
- Input Voltage: 9-15V
- Input Impedance: 100K Ohms
- THD + N: <1%
- Input Sensitivity: 220mV - 4V
- Signal to Noise Ratio: 80dB
- Frequency Response: 5 to 22kHz (-3dBs)
- HPF (Subsonic): 20 to 90Hz @ 12dB / octave Linkwitz-Riley
- LPF (Crossover): 90 to 20kHz @ 12dB / octave Linkwitz-Riley
- Recommended fuse: 100 A
- Rest Current: 1 A
- Maximum Current (musical signal): 100 A
- Power Cables (Min. Recommended): 21mm / 4 AWG
- Output cables (minimum recommended): 2 x 2.5 mm / 2 x 13 AWG
- Weight (Kg): 3.3
- Height (mm): 54
- Width (mm): 209
- Depth (mm): 243

Attention: In accordance with Federal Law No. 11.291, prolonged exposure to noise greater than 85 dB can damage the hearing system.
We are not responsible for fees charged in your country